2N Doorstation - Hardware Interface
This hardware interface is intended to simplify the connection of your Crestron Home system to the popular 2N range of doorstation hardware.
The Switch controls and IO input can be used alongside SIP call functionality to provide a complete solution.
In addition, we offer a range of Door and Lock UI Tiles that provide a user interface to the hardware.
Note: The UI Tile and associated pages are not intended to be customer-facing the main user interaction with the driver tends to be via quick actions.
Finding the Driver
You can find it:
- on the Crestron Home Setup App at : Drivers / Lock / 2N / Verso
This single driver supports all of the 2N Intercom and Access Controllers via a common api.
- on drivers.crestron.io
- you can purchase a license here:
Licence can be applied using the key in
Rack Room Tile
This Hardware Interface driver provides a simple UI intended for use by the integrator to verify hardware operation.
It is generally not client-facing and is typically loaded into a hidden room such as a Rack Room.
All hardware interfaces share a generic image showing two adjacent rings.
Main Page Actions
The home page tile navigates directly to the main user interface of the driver.
This page allows you to test control functions and monitor I/O using the Crestron Home App.
Actions and Events
Actions
| Action | Description | Notes |
|---|---|---|
| Switch X On | Activates Switch X | Switches 1-4 Supported |
| Switch X Off | Deactivates Switch X | Switches 1-4 Supported |
| Dial Panels | Makes a call from the 2N Intercom to the rava:CRESTRON call group. | |
| End Dial Panels | Ends the call made using the “Dial Panels” command. | |
| End All SIP Calls | Ends all active calls on the 2N Intercom device. | Can be used to end an incoming call when the open gate button is pressed. Supported from v4.2.0.0 |
Events
| Event | Description | Notes |
|---|---|---|
| Input X Closed | Event called when Input X is closed | Input 1-4 supported |
| Input X Opened | Event called when Input X is opened | |
| Relay 1 Activated | Event called when Relay 1 is activated | |
| Relay 1 Deactivated | Event called when Relay 1 is deactivated | |
| Output 1 Activated | Event called when Output 1 is activated | |
| Output 1 Deactivated | Event called when Output 1 is deactivated | |
| Switch X Activated | Event called when Switch X is activated | Switches 1-4 Supported |
| Switch X Deactivated | Event called when Switch X is deactivated | Switches 1-4 Supported |
| Motion Detected | Motion Detected based on video detection area and sensitivity threshold setting. | |
| Noise Detected | Noise Detected based on noise detection level threshold. | |
| Call Button Pressed | Call button on intercom presses ( Commonly used to trigger a doorbell using our Sonos Chime driver) |